INFRARED & UV CURING BY HEDSON

Advanced and user-friendly technology

IRT by Hedson offers a wide selection of Short-wave Infrared (IR) and ultraviolet (UVA) mobile dryers and each model has its own area of use. IRT products are user-friendly and are easy to move around in the workshop. Every part in a IRT by Hedson dryer is based on a well thought-out and tested design based on user-friendliness and capacity.

  • Short curing times
  • Large curing area
  • Even heat distribution
  • Gold-coated FreeForm reflectors
  • Reduced energy consumption
  • Environmentally friendly

IRT 1 & 2 PrepCure

Dryers suitable for minor paint and panel work, as well as for applying and removing stickers. The dryers can either be used as hand-held dryer or be mounted on stand. Can cure all base and paint material and the on/off button is integrated in the handle and manual timer on the stand.

IRT 3 & 4 PrepCure

Speed up the drying process of putty, filler and clear coat with the IRT 4 PrepCure by Hedson. With two digital timers, the dryer is very easy to use. These dryers are equipped with a compact cassette that is controlled by two digital timers – Flash off up to 30 minutes, Full bake up to 30 minutes. Even the smallest models are very efficient and perfect for curing on small to medium-sized surfaces.

IRT 4-1 & 4-2 PcAuto

The IRT PcAuto models are equipped with advanced technology such as a temperature measurement, laser circle and digital distance sensor.

18 different languages can easily be set.

The laser circle shows where the measurement of the temperature on the curing area takes place, and the ultrasound sensor measures the distance and signals when the distance is correct. The temperature is continuously measured, while the microprocessor regulates the effective output upwards or downwards in a split second for optimal curing results.

As an operator, you can continuously monitor the curing process and receive information about such things as object temperature and elapsed/remaining program time.

IRT 3-1 & 3-2 PcD

These are the standard dryers for all types of workshops. They are mostly used for small to medium-sized repairs and for primers, but has sufficient output to cure all kinds of paint materials. The IRT PcD by Hedson dryers are equipped with a control unit for computerized curing process. There is a program for each drying requirement and due to the easily understandable and self-instructional menu, program selection is quick and easy. 18 different languages can easily be set.

IRT UV SmartCure

Operational safety in every detail is IRT top priority. SmartCure comes with exchangeable, high quality, long life 18 V lithium-ion batteries. Peak light performance is maintained on a constant high level until the display indicates battery change, no risk of power loss due to discharged battery. The battery charger is hardwearing and reliable. It holds charge over time without risk of overcharging.

  • Excellent curing result in seconds
  • No risk of power loss or over charging
  • Exchangeable batteries eliminate down-time
  • Peak light performance held at max throughout battery cycle

IRT UVA 1 PrepCure 3

Extremely fast curing of vertical surfaces with IRT high intensity outstanding UVA mobile IRT UVA 1 PrepCure 3. A single UVA lamp holds 1000 W. Powerful ventilation and efficient particle filter extends operating life. Ozone-free lamp design with protective glass that filters UVB/UVC radiation. Curing area 1 x 1 m (at a distance of 50 cm with an UV-A intensity of 25 mW/cm2).

IRT UVA 1&2 PrepCure 4

Extremely fast curing with IRT high intensity outstanding UVA mobiles. A single UVA lamp holds 1000 W. Powerful ventilation and efficient particle filter extends operating life. Ozone-free lamp design with protective glass that filters UVB/UVC radiation. Curing area IRT PrepCure4-1: 1 x 1 m, IRT PrepCure 4-2: 1 x 1,7 m (at a distance of 50 cm with an UV-A intensity of 25 mW/cm2).

IRT Combi 4-1 & 4-2

The combination of shortwave infrared and UVA radiation makes this mobile dryer unique. One cassette includes 4 IR lamps and1 UVA lamp. Featured with 15 (IR:12, UV: 3) pre-set programs for water and solvent based paint material, from putty to clear coat.

IRT Rail Systems –Infrared Dryers 3-20 PcD

These dryers are suspended in permanently installed rails and is easy gliding and self-balancing, both laterally and vertically in all directions. As the electric power supply is integrated in the rails, there are no loose cables dragging along the floor disrupting work and raking up dust.

IRT Rail System – Infrared Dryers 4-10 PcAuto &4-20PcAuto

These dryers are suspended in permanently installed rails and is easy gliding and self-balancing, both laterally and vertically in all directions. As the electric power supply is integrated in the rails, there are no loose cables dragging along the floor disrupting work and raking up dust. Easy to use and the curing time is reduced to a minimum. The dryers are equipped with advanced technology such as a temperature measurement, laser circle and ultrasonic distance sensor. 18 different languages can easily be set.

IRT Rail System Dryers –IRT Combi 4-10 & 4-20 IR UVA

IR and UVA can be run individually and in sequence and the infrared lamps are mounted in gold surface reflectors, reflecting up to 98 % of the short-wave radiation. The IRT control unit includes program selection and a time counter for the life length of the lamps.

IRT FlexiCure with 4 curing zones

Each zone is equipped with shortwaveinfrared lamps, gold coated reflectors and pyrometer. 3 IR lamps/zone with atotal power of 38 kW.

  • Two distance sensors, top and side
  • Three IR lamps per zone
  • Four pyrometers – one per zone
  • Speed = 20-200 cm/min

Save energy, time and space with the perfect solution for paint booth curing. With IRT PowerCure the car can be returned in the shortest possible time. IRT PowerCure drastically shortens the curing times for all paint materials with a minimum of energy used. Radically reduce the energy consumption and pay off the investment in a very short time. IRT PowerCure will only heat and cure the selected panels of the car. IRT PowerCure keeps track of position and status of the curing process and will turn on- and off the individual lamps in a fraction of a second, to only use the energy needed for the curing job.

Reaching and maintaining the highest quality curing results has never been easier. With an IRT Rail System by Hedson, quickly maneuver the heater into the perfect curing position, reaching all parts of the vehicle.

SPOTCURE²

  • Powerful, temperature regulated ventilation – built to last
  • Uniform light intensity
  • Advanced overheating protection
  • User comfort with grip ribs and membrane display
  • DIY exchangeable power cord
  • Filter replacement indicator
  • User preference memory function
  • Operational safety with third party certification
  • Multi-function timer display guides the way
  • Ergonomic design – for a healthier work environment